Fogging Technique and Application:
Thermal fogging is the generation of ultra-fine droplets in a range of 1-50 μm using thermo-pneumatic energy. Liquid substances are vaporized in the unit and form ultra-fine aerosols by condensing on contact with cool ambient air.
Thermal fogging is used for any pest control task where active substances should be uniformly distributed even in inaccessible places, without leaving undesirable residues.
The fogging technique is the solution for treating large areas and spaces with a minimum quantity of pesticide solution, less operational work and with little harm to the environment (less residues, no penetration into the ground), e.g.
in the field of public health, stock protection, plant protection, disinfection, decontamination, deodorization and cinema effects.
Technical Specifications:
Empty weight 18 kg (without solution tank)
Size (L × B × H) 132 × 38 × 47 cm
Solution tank capacity 55 Litres (square version), polyethylene
Fuel tank capacity 20 Litres (optionally 10 Litres)
Engine cubic capacity 1000 cm³
Max.engine performance 37.4 kW (50.8 hp, 32,200 kcal/h)
Max. fuel consumption 3.8 L/h
Ignition system Electronic ignition coil (4 × dry batteries = 6V)
Starting device Manual start
Flow rate range 10 – 75 L/h (depending on nozzle size)
Standard flow rate 40 L/h
Optional equipment :
Electrical starting device
Remote control with automatic cut-off device and manual start Turntable
Droplet size spectrum (depending on oil viscosity and nozzle size used):
< 25 μm (oil).
< 60 μm (oil/water).
< 150 μm (water).
